P-Square Agencies - Woodturning Supplies Australia
 
 
         
    


Proceed to checkout
 
A - Beverage Accessories Coffee Mug Inserts, Bottle Openers, Bottle Stoppers, etc.
B - Cutlery
C - Pewter & Brass Ware, Pot Pourri Lids, Key Hangers & Card Holders
D - Salt, Pepper, Herb Mills, CrushGrind, S & P Plugs, Shakers & Coffee Kits
E - Dust Bee Gone Masks
F - Pen Kits & Other Kits, Desk Accessories
Abrasives - Fine Micro - Wet & Dry - Pads & Discs
Brass Tubes For Kits
Bullet & Tank Pen Kits
Bushes For Pens & Other Kits
Calendars
Click Pens
Crystal Pen Kits
Desk Accessories, Solar Calculators, Pen Trumpets
Junior Gentleman & Graduate Pen Kits
Key Ring Kits
Kit Parts, Centre Bands, Stylus Touch Caps, Twist & Click Mechanisms, Seam Ripper, Bolt Action Levers,etc.
Letter Opener Kits
Magnifying Glass Kits
Miscellaneous Pen Kits
Other Kits - Seam Ripper, Chalk Holder, Magnetic Pick Up Kit, Torch Kits, Stylus Kits, Kaleidoscope Kit, etc.
Pen & Pencil Refills
Pen Blank Acrylic Rods 19mm Round x 130mm Long
Pen Blank Acrylic Rods 19mm Round x 300mm Long
Pen Blanks Acrylic Square 19mm x 19mm x 130mm
Pen Blanks Yunstone
Pen Cases, Binders, Pouches & Acrylic Displays
Pen Clips Fancy & Standard
Pen Making Tools
Pencil Kits
Perfume Kits
Polaris Pen Kits
Razor Kits & Stands
Sierra Tube Based Pen Kits, Lancer, Elegant Beauty
Slimline Pen Kits
Spiritual & ProzX Pen Kits
G - Insert Clocks & Skeleton Clocks
H - Miscellaneous Craft Kits, Jewellery Findings, Key Rings, Candle Cups, Bud Vase Inserts & Parts
I - Hardware - Lazy Susans, Forstner Bits & Bloxygen
J - Souvenir Coins Penny Paper Weight
K - Weather Instruments
L - Ceramic Tiles & Cork
M - Instructions
N - Woodturning & Woodcarving Magazine & Binder GMC Publication

Home : F - Pen Kits & Other Kits, Desk Accessories : Kit Parts, Centre Bands, Stylus Touch Caps, Twist & Click Mechanisms, Seam Ripper, Bolt Action Levers,etc. :

[PENBULLBALG] Bolt Action Lever Replacement Gold
enlarge...

[PENBULLBALG] Bolt Action Lever Replacement Gold


add to cart
Price: $0.66
Product code: PENBULLBALG

In stock: yes


Bolt action pen kit lever replacement gold colour suites the Chinese made kits, sold as a single lever only. To replace the lever unscrew the nib end as you would to replace the ink refill. Remove the spring and refill, insert a small Phillips screw driver into the body of the pen and engage the screw driver with the slots in the screw head of the clip end. Wind anti clock wise a full turn to loosen the screw. You may need to use a small set of pliers to hold the broken off piece of the old lever left behind. Grip the broken part and unscrew anti clock wise, if itís a bit tight unscrew the retaining screw a little more and try again. Line up the threaded hole with the slot and screw in the replacement lever, position it, tighten the retaining screw, do not over tighten. You can use the ink refill to help position the threaded hole by just pushing it up inside the body engage the mounting and twist until you see the threaded hole through the slot. You might find the bolt action mounting unit will slide out without removing the broken lever if this is the case remove the broken part and reinsert the mounting unit back in the pen body rotating it until the threaded hole appears in the lever slot. Thread in the new lever and position, then tighten the retaining screw, do not over tighten. Return the ink refill and spring, screw on the nib and the pen should be its original working condition.

 

Copyright © P-Square Agencies. All rights reserved.